The manufacturer of stainless steel 304 clamps tells you that although the pipe connection is easy to install, it must be carefully operated according to the instructions, otherwise the pipe will leak, and the consequences will be very serious. The following stainless steel 304 clamps manufacturers will tell you what problems will occur during the installation process.

1. Do not draw a line on the pipe end first during installation.
The manufacturer of stainless steel 304 clamps tells you that drawing the line is an important step in the installation of Dalian pipe clamps. It can help us avoid the pipe tilting during the installation process, and can accurately lock the connection part, so that the inner rubber ring can completely cover both ends of the pipe .
2. There is a problem with the outer diameter of the pipe
The manufacturer of stainless steel 304 clamps tells you that when we choose Dalian pipe clamps, we refer to the nominal diameter DN for purchase. One specification of DN corresponds to the outer diameter of two sizes of pipes, so we can determine which outer diameter of the pipe we need. If the outer diameter of the pipe is not the same, the pipe and the connector cannot be closely connected, which will cause problems such as disconnection and leakage.
3. Install without the torque on the installation instructions
The manufacturer of stainless steel 304 clamps tells you that we must refer to the torque in the manual when twisting the bolt. If the torque is not reached, the pipe connection will not be tight enough. Buckle, both methods will cause problems with the pipe connection.