Straub pipe repair clamps manufacturers tell you that although the pipe connection is easy to install, it must be carefully operated according to the instructions, otherwise the pipe will leak, or even explode in severe cases. The following Straub pipe repair clamps manufacturers will tell you what problems will occur during the installation process.

1. Do not draw a line on the pipe end first during installation.
Line drawing is a very important step in the installation of Straub pipe repair clamps. It can help us avoid the pipe tilting during the installation process, and at the same time can accurately lock the connection part, so that the inner rubber ring can completely cover both ends of the pipe.
2. There is a problem with the outer diameter of the pipe
Often when we choose Straub pipe repair clamps, we refer to the nominal diameter DN for purchase. One specification of DN corresponds to the outer diameter of two sizes of pipes. Determine which outer diameter of the pipe we need. If the outer diameter of the pipe is not correct On the other hand, the pipes and connectors cannot be closely connected, which will cause problems such as disconnection and leakage.
3. Install without the torque on the installation instructions
Straub pipe repair clamps manufacturers tell you that when we twist the bolts, we must refer to the torque on the manual for installation. If the torque cannot reach the torque, the pipe connection will not be tight enough. If the torque is too large, the bolts will be tripped. Both methods will cause There is a problem with the plumbing connection.